Isuzu D-Max Rear Semi-Air Suspension Kit — 2014 to 2019

Isuzu D-Max Rear Semi-Air Suspension Kit — 2014 to 2019 (AKS2091Y)
 
A rear semi-air suspension kit supplied by On Air Suspension for the Isuzu D-Max, covering 2014 to 2019 model years. For 2020 onwards, see [AKS2081Y].
 
The Isuzu D-Max is built for work — but its rear suspension is calibrated for an unladen vehicle, not a loaded one. Under payload, the rear squats, handling can suffer as can towing stability. This is the aftermarket suspension upgrade.
 
The kit works alongside the D-Max's existing rear suspension. The original bump stops are removed and the air springs fitted in their place, providing on-demand load support that can be adjusted to suit varying payloads in the pickup bed.
 
What it does:
 
Pickup trucks carry variable loads almost entirely in the bed — the rear suspension takes the full brunt of this. Under load, the rear sits lower, affecting ride quality, handling, tyre wear and headlight aim. This kit addresses all of that without altering the vehicle's legal kerb weight or GVW.
 
Load levelling — keeps the vehicle level whether loaded or empty
Roll stability — increased roll stiffness reduces body lean when passing high-sided vehicles or cornering under load
Rear height control — provides a small amount of rear lift on demand
Towing stability — reduces pitching and improves brake effectiveness under tow
 
Inflation & Controls
This kit is supplied for manual inflation as standard — air is introduced via a standard tyre inflator or workshop compressor through the included inflation panel. No on-vehicle compressor is required for basic operation.
 
For a more convenient setup, we supply two compressor kits as optional additions:
 
PCP1014R — Compressor and single gauge kit. Air springs are linked — both sides inflate together.
PCP1016Z — Compressor and dual gauge kit. Independent left and right inflation for off-centre load adjustment.
 
For fully automatic load levelling, the kit is compatible with the On Air Active Advanced Air Suspension Control System (CKA9001Z). On Air Active uses a single height sensor to continuously monitor and adjust ride height, maintaining the ideal level at any legal payload. The system also includes a lowering function for improved access when required.
 
Kit includes:
 
On Air/SABO double convoluted air springs × 2
Semi-air fixing pack
Composite inflation panel
Brass push-fit fittings and flexible nylon tubing
Full fixings, washers and hardware
 
SKU: AKS2091Y
Compatibility: Isuzu D-Max 2014–2019
Type: Rear semi-air — works alongside existing suspension
 
Not sure which kit is right for your vehicle? Contact our team before ordering.